24/7 emergency

Call 845-246-3231

H&H Environmental

Knowledge Center · Mold

Mold on Drywall: What EPA Says About Cleaning It and When to Call for Help

How to handle mold on drywall depends mostly on how much there is and whether any is hidden.

EPA says most people can generally handle an area of less than about 10 square feet, that larger areas call for more, and that disturbing hidden mold can release spores.

EPA does not say whether mold on drywall can be cleaned or whether the drywall must be cut out. That is a judgment about the particular wall.

Published by
H&H Environmental
Sources
Sources checked November 18, 2026
Reading time
4 min read

Mold on a wall or ceiling?

  1. Measure the area. EPA’s dividing line is about 10 square feet, roughly a 3 foot by 3 foot patch.
  2. Fix the water problem first. Mold returns if the moisture does.
  3. Do not cut into the wall or strip wallpaper if hidden mold is possible. It can release spores.
  4. Wear protective gear and avoid exposing others if you do clean a small patch.
  5. If anyone has asthma or other health concerns, talk with a healthcare professional first.
  6. Call for help for larger areas, water damage behind the wall, or mold you cannot trace.

Size Is the First Question

Mold on drywall is not one problem. A small patch from a recent drip and a wall that has been wet for weeks are very different jobs.

EPA says that if the moldy area is less than about 10 square feet, most people can generally handle the cleanup themselves. For a lot of water damage, or mold covering more than 10 square feet, it points to its guidance for schools and commercial buildings (EPA).

That guidance names wallboard (drywall and gypsum board) as a material category, and sorts jobs by size: under 10, 10 to 100, and over 100 square feet. Protective equipment and containment increase as the area gets larger (EPA). EPA says the tiers help choose techniques and are not meant to tie health effects to a particular square footage.

The Mold You Cannot See

EPA gives drywall as an example of how a wall can mislead: wallboard that looks fine in front can be covered with mold on the back. It names the back side of drywall, wallpaper and paneling as places mold hides, and notes that vinyl wallpaper over drywall can trap moisture (EPA).

It also warns that investigating hidden mold calls for caution, because disturbing it can release spores. Removing wallpaper is its example. If you believe you have a hidden mold problem, it says to consider hiring an experienced professional (EPA).

If It Is a Small Patch

For hard surfaces, EPA says to scrub mold off with detergent and water and dry completely, and to fix leaks and water problems as soon as possible (EPA). EPA does not recommend bleach as a routine part of mold cleanup (EPA). For the whole picture, see cleaning up mold: a small patch or a professional job.

If the wall was wet, EPA says to dry wet items and areas within 24 to 48 hours where possible (EPA). See structural drying and water damage restoration.

If Anyone Has Symptoms

If anyone in your household has asthma, allergies or other health concerns, talk with a healthcare professional before cleaning. See what EPA says about mold and health.

What H&H Does About Mold

H&H Environmental has operated since 2005 and offers both mold assessment and mold remediation. A mold assessment is an evaluation of whether there is mold, and where.

On a New York mold project, H&H performs either the mold assessment or the mold remediation — never both on the same project. See mold assessment, mold remediation and mold services.

Call and tell us where the property is and what you have noticed, and we will confirm availability.

Frequently asked questions

Can I clean mold off drywall myself?

EPA says most people can generally handle an area of less than about 10 square feet, but larger areas or a lot of water damage call for more (EPA).

Does moldy drywall have to be cut out?

EPA does not say either way. It notes that mold can grow into porous materials and that mold can stain. The answer depends on the wall, which is a job for someone who can inspect it.

Can there be mold behind drywall that looks fine?

Yes. EPA gives the example of wallboard that looks fine in front while the back is covered with mold (EPA).

Is it safe to open the wall to look?

EPA says disturbing hidden mold can release spores and advises considering an experienced professional (EPA).

Why does mold keep coming back on the same wall?

The moisture source is likely still there. EPA says the key to mold control is moisture control (EPA).

Sources

The safety, health and local statements above come from these public sources. This article summarizes them in its own words, so follow the links for the full guidance.

U.S. Environmental Protection Agency

Water in the building? Start with a call.