Why Mold Shows Up in Closets
A closed closet traps damp air, and anything stored in it that is not dry can add to the moisture.
EPA does not discuss closets. What it does say about mold applies to them: the key to mold control is moisture control. Mold needs moisture, so a closet with mold has a moisture source, even if it is not obvious.
Where the Moisture Can Come From
- Humid indoor air. EPA suggests keeping indoor humidity below 60 percent, ideally between 30 and 50 percent, and says an inexpensive humidity meter can measure it (EPA).
- Condensation. EPA says condensation on windows, walls or pipes can signal high humidity, and to dry the surface quickly and reduce the source of moisture (EPA).
- A leak. EPA says to repair plumbing leaks and other water problems as soon as you find them, and to dry wet or damp items and areas within 24 to 48 hours (EPA).
- Appliances. EPA says to vent moisture-producing appliances such as clothes dryers to the outdoors where possible (EPA).
EPA also says to use air conditioners or dehumidifiers when needed (EPA).
If There Is Mold on Belongings
EPA says that on hard surfaces, mold can be scrubbed off with detergent and water, and the surface dried completely. Porous materials such as ceiling tiles and carpet may have to be thrown away, because mold can grow into their gaps and may be hard or impossible to remove completely (EPA).
EPA adds that mold can stain or cause cosmetic damage that cleaning does not fully reverse, so an item may not look fully restored (EPA). EPA also does not recommend bleach as a routine part of mold cleanup (EPA); see cleaning up mold: a small patch or a professional job.
When a Closet Points to a Bigger Problem
A closet that keeps getting moldy after you dry it can mean moisture is coming from somewhere you cannot see. EPA says you may suspect hidden mold if a building smells moldy but you cannot see the source, and that investigating it calls for caution, because disturbing it can release spores (EPA). See hidden mold and a musty smell.
If the moisture came from a leak, a burst pipe or a flood, the water problem needs proper drying. See structural drying and water damage restoration.
What H&H Does About Mold
H&H Environmental has operated since 2005 and offers both mold assessment and mold remediation. A mold assessment is an evaluation of whether there is mold, and where.
On a New York mold project, H&H performs either the mold assessment or the mold remediation — never both on the same project. See mold assessment, mold remediation and mold services.
Call and tell us where the property is and what you have noticed, and we will confirm availability.