24/7 emergency

Call 845-246-3231

H&H Environmental

Knowledge Center · Mold

When a Commercial Building Should Be Tested for Mold

EPA says it is impossible to eliminate all mold and spores indoors, so the useful question is whether there is a moisture problem and visible or suspected growth.

Sampling is usually unnecessary when mold is visible, and EPA says it should be designed and carried out by professionals with specific experience.

EPA’s guide is written mainly for building managers and maintenance staff. This page summarizes what it says about evaluating a problem.

Published by
H&H Environmental
Sources
Sources checked November 18, 2026
Reading time
5 min read

Managing a building with a possible mold problem?

  1. Start with a walk-through: visible mold, damaged materials, musty smells, leaks, condensation, HVAC problems.
  2. Ask the occupants whether they notice musty or moldy smells and whether anyone reports health problems.
  3. Find the moisture source before anything else. Mold follows moisture.
  4. Do not disturb suspected hidden mold. Disturbing it can release large numbers of spores.
  5. Do not run a mold-contaminated HVAC system.
  6. Hold off on sampling until a professional has a plan for what it is meant to answer.

Some Mold Is Normal. A Moisture Problem Is the Question

Finding a little mold in a building does not by itself mean something is wrong. A building that is damp, though, can have a growing problem.

EPA says it is impossible to eliminate all mold and mold spores in the indoor environment, and that mold growth can be controlled indoors by controlling moisture (EPA). The causes of moisture it lists include roof leaks, landscaping or gutters that direct water toward the building, unvented combustion appliances, uncontrolled humidity, and delayed or insufficient maintenance. It adds that tightly sealed buildings may lack adequate ventilation (EPA).

What a First Look Covers

EPA’s evaluation guidance starts with looking and asking rather than sampling:

  • Visible mold, damaged materials and moldy odors, and the moisture sources behind them: high humidity, condensation, water leaks, maintenance issues and HVAC problems (EPA).
  • Occupant questions. Do occupants report musty or moldy smells or health problems? Has there been recent remodeling, a change in use, or delayed or changed maintenance? (EPA).
  • Moisture meters. EPA says they measure moisture in building materials after water damage and can monitor drying; a humidity meter measures the air, not the material (EPA).
  • Hidden growth. EPA names the back of drywall, wallpaper and paneling, the top of ceiling tiles, pipe chases, condensate drain pans, ductwork liners and roof materials above ceilings (EPA).

When Sampling Is Considered

EPA says sampling is generally unnecessary when mold growth is visible. It may be considered when litigation is involved, when the source of the mold is unclear, or when health concerns exist, and surface sampling can help confirm that an area was adequately cleaned (EPA).

  • No federal limits. EPA says no federal threshold limits have been set for mold or spores, so sampling cannot show compliance with a federal standard (EPA).
  • A plan first. EPA says to develop a sampling plan with a testable idea of the suspected source before sampling, and that if you cannot sample properly it is preferable not to sample (EPA).
  • Experienced people. EPA says sampling should be done by professionals with specific experience designing mold sampling protocols, and lists pitfalls of inexperience such as too few samples, contaminated samples and no outdoor comparison (EPA).
  • A snapshot. EPA describes air samples as a snapshot of conditions at one moment, and says interpreting results takes experience (EPA).

EPA adds that sampling before and after remediation can help judge whether it worked, and that after cleanup, indoor mold types and concentrations should resemble local outdoor air (EPA).

Occupants and Communication

EPA says some occupants, especially those with allergies or respiratory problems, may report health effects, and recommends continuing to communicate with occupants and consulting a health professional when serious health concerns are reported (EPA). See what EPA says about mold and health.

What H&H Does About Mold

H&H Environmental has operated since 2005 and does mold work and indoor air quality testing on commercial buildings as well as homes. It offers both mold assessment and mold remediation. A mold assessment is an evaluation of whether there is mold, and where.

On a New York mold project, H&H performs either the mold assessment or the mold remediation — never both on the same project. See mold assessment, mold remediation, mold services and indoor air quality testing. If you manage a building, call and tell us about it.

Call and tell us where the property is and what you have noticed, and we will confirm availability.

Frequently asked questions

Does every commercial building need mold testing?

No. EPA says sampling is generally unnecessary when mold growth is visible, and that it may be considered when the source is unclear, when litigation is involved, or when health concerns exist (EPA).

Is there a legal limit for mold in a building?

EPA says no federal threshold limits have been set for mold or mold spores (EPA). Other rules are outside this article.

Who should do the sampling?

EPA says professionals with specific experience designing mold sampling protocols (EPA).

Can all mold be removed from a building?

EPA says it is impossible to eliminate all mold and spores indoors, and that mold growth is controlled by controlling moisture (EPA).

What should the first step be?

Look for visible mold, damaged materials and odors, ask occupants what they notice, and find the moisture source (EPA).

Sources

The safety, health and local statements above come from these public sources. This article summarizes them in its own words, so follow the links for the full guidance. Each page was read on November 18, 2026.

U.S. Environmental Protection Agency

Water in the building? Start with a call.